Classic Flooring is straight-lined and simple and does impress by its extreme resistance (sturdy until 50 to/m²). The plastic is added a special antioxidant as well as a UV stabiliser and together they prevent from rotting.
The tile can easily be cleaned – of course as well by steam-blasting until maximum 80 bar. The tile is well-proofed to slip resistance to DIN 51130:R 10.
Classic flooring is the ideal solution for placing inside especially when renovating your home - e.g. in cellars or in garages to cover poor floors. But the tiles are suitable as well for outside e.g. to beautify your balcony, in wellness resorts or just to install the tiles at trade fairs or other events.
400 x 400 x 18mm
0,65 kg (per tile)
Stability of shape:
-30°C up to +80°C
until 50 to/m²
against acid and base
antistatic, slip resistant DIN 51130:R10
Colours Most frequent colours we keep in stock!
Classic Flooring sample pictures
Side parts and edges are the ideal solutions to mark the surface and to prevent tripping hazards, e.g. in the garage, on the terrace to the garden side, in the garden etc. And, by the way, the side parts offer the possibility to walk on safe and without stumbling with wheelchair, buggy or walking frame.
The expansion joints are used for
- to install electric cables clever and hidden under the tiles
- to avoid that the tiles do rise in the heat
Advice: If the surface has more than 10 m², we recommend to install an expansion joint that the tiles have the possibility to an extent. You also can put tile on tile – without putting the tiles together loop into pin – you lay the tiles only side to side. Due to this solution, the tiles do not rise by heat, and they do always lay flat.
DRD International Copyright @ All Rights Reserved
Nijkerkerstraat 35-A, 3821 CD Amersfoort | +31 (0)636 162 421 | firstname.lastname@example.org
KvK 32164440 | EU vat: NL001 925 563 B26